PrintYourFix · Eyewear digital twins
Virtual try-on
Pick a frame and see it on your face, live. Use the front camera for a selfie, the back camera to try frames on someone else, or upload a photo. Every frame is a real-size 3D model.
32 frames
real-size 3D models
46–57 mm
lens widths
≈ 1 MB
per model
On-device
face tracking
…
Frames
No frames match these filters.
What we need to make your frames in 3D
Send either the frames or good photos. Per frame, this is all we need:
01 · PHOTOS
5 photos per frame
- Front, straight on
- Front three-quarter
- Left side, temples open
- Right side, temples open
- From behind (nose pads)
02 · HOW TO SHOOT
Phone camera is fine
- Plain, light background (white or grey card)
- Soft daylight, no flash, no strong reflections
- Temples fully open, frame clean
- Sharp and filling most of the photo
- Demo lenses can stay in
03 · DETAILS
The numbers on the temple
- Model and colour code, e.g.
RD R4378VF · C5 - Size code, e.g.
52□19-145, so the 3D frame has the real size - Optional: product name, price or shop link for the catalogue
04 · YOU GET
Ready for your website
- One GLB 3D model per frame, about 1 MB
- Product pictures rendered from the model
- This try-on page set up with your frames
- Reply within 24–48 h, models in 7–14 days
No photos? Bring or post the frames to us in Sarajevo and we photograph them.
How the digital twins are made
- PhotographEach frame is shot from the front, sides and back.
- GenerateAn AI model turns the photos into a textured 3D mesh.
- Clean up and sizeGeometry is fixed, aligned and scaled to the size printed on the temple.
- OptimiseEach model goes from about 40 MB to about 1 MB so it loads fast on a phone.
- Try onFace tracking in the browser places the frame on your nose bridge.
AI MODELS → WEB & PRINT
Want try-on for your shop?
These 32 frames come from a set of more than 200 we turned into digital twins. Send us your frames or product photos and we build the 3D models and the try-on for your site.