Ko-fi Get a free quote
AI · Mesh repair · Printed figure

On top of the world: AI to figure

A person generated with AI, turned into a 3D model, repaired for printing and finished as a hand-painted figure.

It started as a single AI image: a man in a suit on top of a red roof, raising a trophy. We turned that image into a textured 3D model, repaired the mesh so it would print, split it into parts and printed it. After filling, sanding, priming and painting, the figure stands on the same red roof as in the picture. Drag the model below to rotate it, or scroll and pinch to zoom.

1 image
AI concept to start
3 parts
figure, trophy, roof base
CR-10 Max
printed in-house
Hand-painted
filled, primed, painted
3D MODEL · ON TOP OF THE WORLDGLB · DRAG TO ROTATE
TrophySuitRoof base
Swipe sideways to rotate
01

Gallery

Full turn of the 3D model
The AI image everything started from
Finished figure, front viewFront, slightly lower angleFront, full heightLeft side: the trophy held out at arm's lengthBack view of the suit and the roof baseRight side with the painted hand
Finished 1 / 6
Finished figure, front view
Raw print with filler on the seamsPainted parts before assembly: figure, roof base and trophySuit painted, face and hands still to do
Work in progress 1 / 3
Raw print with filler on the seams
Render, frontRender, three-quarter viewRender, sideRender, backRender, other side
3D renders 1 / 5
Render, front
02

From AI to print

Step 1 · ImageAI conceptOne generated picture sets the pose, the outfit and the red roof base.
Step 2 · 3DImage to 3DThe picture becomes a textured GLB model, the one you can rotate above.
Step 3 · RepairPrintable meshHoles closed, thin areas made thicker, and the model split into parts.
Step 4 · MakePrint & paintPrinted, filled, sanded, primed and painted by hand, then assembled.
StartOne AI-generated image
3D modelAI image-to-3D, textured GLB
Mesh prepRepaired into a solid, printable mesh
PartsFigure, trophy in hand, roof base
PrinterCreality CR-10 Max
FinishFiller, sanding, primer, hand-painted details
Web modelGLB compressed from 30 MB to under 3 MB

Why the mesh needs repair

AI models look good on screen but are rarely ready to print. They have holes, very thin parts and surfaces that cross each other. We make the mesh solid and watertight and give the thin parts, like the trophy handles, enough thickness to survive printing and painting.

Why it is printed in parts

The figure, the trophy and the roof base print separately. Each part can then be printed in the best position, painted on its own and glued together at the end.

YOUR OWN FIGURE

Want a figure of you or someone you know?

Send us one photo or an idea. We create the AI concept, build the 3D model and print and paint the figure. A good gift for a boss, a colleague or a winning team. Message us for price and delivery time.

WhatsApp us Request a quote
Order a custom figure YouTube Instagram PrintYourFix on OLX
03

How it was made

  • AI image generator
  • AI image-to-3D
  • Mesh repair software
  • Slicer
  • CR-10 Max
  • Filler & sandpaper
  • Primer & paints
  1. Generate the imageCreate the picture first: the person, the suit with the red tie, the raised trophy and the red roof base with the PRINTYOURFIX plate.
  2. Turn it into 3DConvert the image into a textured 3D model. Check it from every side, because the AI has to guess what the back looks like.
  3. Repair the meshClose the holes, remove surfaces that cross each other and thicken thin areas such as the trophy handles, fingers and shoe edges.
  4. Split and printCut the model into the figure, the trophy and the roof base, place each part on the bed in its best position and print.
  5. Fill and sandFill the seams and layer lines with putty, sand smooth and prime until the surface is even.
  6. Paint and assemblePaint the suit, shirt, tie and roof, then the face, hair and hands by hand. Glue the trophy into the hand and the figure onto the roof.
04

Credits

Concept image and 3D model generated with AI. Mesh repair, printing, painting and assembly by PrintYourFix, Sarajevo.

← All projects